Got the electronics tank back in last night. Had to charge the battery over night because there wasn't enough juice to crank over the engine. The ignition would still run as low as 6V, so I could just kick start it. The bike now starts with either a key or kick. I have some minor adjustments to make on the tank and then paint it. I would normally leave it bare metal but there's just so much done to it that it needs paint. I'm going to look for a metal-like silver. Also finished the connector from the alternator so it can now charge itself, key start, and power the main harness that I ran from the back to the front. Next up is finishing all of the remaining electronics (head/tail lights, switches, indicators, etc).